CONFERENCE PAPERS

48. Jin, Y., Antonelli, P.J., Long, C.J., McAleer, C.W., James J. Hickman, J.J., Xiong, R., and Huang, Y., “Nanoclay Suspension-Enabled Extrusion Printing Of 3D Soft Structures For Biomedical Applications,” Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference (MSEC2020), Cincinnati, OH, MSEC2020-8330, pp. 1-10, June 22-26, 2020.

47. Xu, C., Zhang, Z., Huang, Y., and Xu, H, “Phase Diagram of Pinch-Off Behaviors During Drop-on-Demand lnkjetting of Alginate Solutions,” Proceedings of the ASME 2019 14th International Manufacturing Science and Engineering Conference (MSEC2019), Erie, PA, MSEC2019-2915, pp. V001T05A006-1-9, June 10-14, 2019.

46. Jiang, W., Jin, Y., Huang, Y., and Wang, G., “Investigation of Additive Manufacturing Methodology with Mixed Silver Powder and SU-8 Conductive Ink for 3-D RF Structures,” Proceedings of 2018 IEEE MTT-S International Wireless Symposium (IWS), Chengdu, China, pp. 1-3, May 6-10, 2018.

45. Jiang, W., Jin, Y., Wang, T., Huang, Y., and Wang, G., “3-D Printed X-Band Yagi-Uda Antenna,” Proceedings of 2018 IEEE Radio and Wireless Symposium (RWS), Anaheim, CA, pp. 290-292, Jan. 15-18, 2018.

44. Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., and Huang, Y., “Study of Chip Morphology and Chip Formation Mechanism during Machining of Magnesium-based Metal Matrix Composites,” Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference (MSEC2017), MSEC2017-3052, pp. V002T03A008-1-9, June 4-8, 2017, Los Angeles, CA.

43. Christensen, K. and Huang, Y., “Study of Layer Formation during Droplet-Based 3D Printing of Gel Structures,” Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference (MSEC2017), MSEC2017-3050, pp. V004T05A019-1-10, June 4-8, 2017, Los Angeles, CA.

42. Davis, B., Hartwig, K.T., Liang, S.Y., and Huang, Y., “Evaluation of Chip Morphology during Machining of ECAE Titanium,” Proceedings of 2016 International Symposium on Flexible Automation (ISFA2016), Cleveland, Ohio, USA., pp. 418-421, August 1-3, 2016.

41. Xiong, R., Christensen, K., Fu, J., Markwald, R.R., and Huang, Y., “Freeform Laser and Inkjet Printing of Biological Constructs,” Proceedings of 2016 International Symposium on Flexible Automation (ISFA2016), Cleveland, Ohio, USA., pp. 243-246, August 1-3, 2016.

40. Xiong, R., Christensen, K., Xu, C., and Huang, Y., “Jet-Based 3D Printing of Biological Constructs,” Proc. of Twenty-Fifth International Solid Freeform Fabrication Symposium, Austin, TX, pp. 1069-1075, August 4-6, 2014.

39. Xu, C., Zhang, Z., Fu, J., Huang, Y., and Markwald, R.R., “Time-Resolved Study of Droplet Formation Process During Inkjetting of Alginate Solution,” Proc. of Twenty-Fourth International Solid Freeform Fabrication Symposium, Austin, TX, pp. 253-259, August 12-14, 2013.

38. Xu, C., Huang, Y., and Markwald, R.R., “Vertical and Horizontal Fabrication of Alginate-Based Vascular-Like Constructs Using Inkjetting,” Proc. of Twenty-Third International Solid Freeform Fabrication Symposium, Austin, TX, pp. 307-315, August 6-8, 2012.

37. Yan, J., Gudapati, H., Huang, Y., and Xu, C., “Effect of Sodium Alginate Concentration during Laser-Assisted Printing of Alginate Tubes,” Proc. of the ASME 2012 International Symposium on Flexible Automation (2012 ISFA), St. Louis, MO, USA, ISFA2012-7253, pp. 501-505, June 18-20, 2012.

36. Yang, F., Wang, K.-C., and Huang, Y., “Experimental Study of Data Transmission Performance for Rotating Wireless Sensors Using Automatic Repeat Request,” Proc. of the ASME 2012 International Symposium on Flexible Automation (2012 ISFA), St. Louis, MO, USA, ISFA2012-7252, pp. 239-244, June 18-20, 2012.

35. Herran, C.L., and Huang, Y., “Alginate Microsphere Fabrication Using Bipolar Wave-Based Drop-on-Demand Jetting,” Proceedings of the 39th North American Manufacturing Research Conference (NAMRC 39), Corvallis, Oregon, USA, NAMRC39-4799, pp. 1-9, June 13-17, 2011.

34. Xu, C., Huang, Y., and Lin, Y., “Effects of Operating Conditions on Thin Film Deposition Performance in Air Atomizing Spray Pyrolysis,” Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference (MSEC2010), Erie, PA, USA, MSEC2010-34128, pp. 95-104, Oct. 12-15, 2010.

33. Wang, W., Herran, C.L., Coutris, N., Huang, Y., Mironov, V., and Markwald, R., “Study of Double-Layered Microcapsule Formation in Compound Nozzle Jetting,” Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference (MSEC2010), Erie, PA, USA, MSEC2010-34127, pp. 567-576, Oct. 12-15, 2010.

32. Lin, Y., Huang, Y., and Chrisey, D.B., “Metallic Foil-Assisted Laser Direct Writing of Human Colon Cancer Cells,” Proceedings of the 9th International Conference on Frontiers of Design and Manufacturing, Changsha, China, pp. 1-6, July 17-19, 2010.

31. Tang, L., Wang, K.-C., and Huang, Y., “Effect of Moving Forklift on Data Transmission of IEEE 802.15.4 Wireless Sensor Radio,” Proc. of 2010 International Symposium on Flexible Automation, Tokyo, Japan, ISFA2010UPL-2536, pp. 1-7, July 12-14, 2010.

30. Herran, C.L., Chai, W., Lin, Y., and Huang, Y., “Fabrication of Sodium Alginate Microspheres Using Drop-on-Demand Jetting,” Proceedings of the 5th International Conference on Micromanufacturing (ICOMM/4M 2010), Madison, WI, No. 78, pp. 465-470, April 5-8, 2010.

29. Yin, J., and Huang, Y., “Investigation of Process-Induced Cell Membrane Stability Using Molecular Dynamics Simulation,” Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference (MSEC2009), West Lafayette, Indiana, USA, MSEC2009-84374, pp. 9-16, October 4-7, 2009.

28. Wang, W., Huang, Y., and Lin, Y., “Modeling of Thermoelastic Stress Wave in Laser-Assisted Cell Direct Writing,” Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference (MSEC2009), West Lafayette, Indiana, USA, MSEC2009-84373, pp. 705-712, October 4-7, 2009.

27. Huang, Y., and Morehead, M., “Study of Machining-Induced Microstructure Variations of ECAE-Processed Ultrafine-Grained Copper,” Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference (MSEC2009), West Lafayette, Indiana, USA, MSEC2009-84124, pp. 47-56, October 4-7, 2009.

26. Lin, Y., Huang, G., Huang, Y., Tzeng, T.J., and Chrisey, D.B., “Effect of Laser Fluence in Laser-Assisted Direct Writing of Human Colon Cell,” Proc. of Twentieth International Solid Freeform Fabrication Symposium, Austin, TX, No. 55, pp. 641-651, August 3-5, 2009.

25. Bao, R., Yan, Z., Huang, Y., and Chrisey, D.B., “Fabrication of Dispersed Permalloy Nanoparticles by Pulsed Laser Ablation in Aqua,” Mater. Res. Soc. Symp. Proc. Vol. 1118, Boston, MA, 1118-K02-08, pp. 1-8, Dec. 1-5, 2008.

24. Yin, J., Coutris, N., and Huang, Y., “Numerical Study and Scale Analysis of Inner and Outer Diameters Prediction in Fabrication of Hollow Fiber Membranes for Nerve Regeneration,” Proc. of the ASME 2008 International Manufacturing Science and Engineering Conference (MSEC 2008), Evanston, Illinois, USA, MSEC_ICMP2008-72243, pp. 515-523, October 7-10, 2008.

23. Wang, W., Li, G., and Huang, Y., “Modeling of Bubble Expansion-Induced Cell Mechanical Profile in Laser-Assisted Cell Direct Writing,” Proc. of the ASME 2008 International Manufacturing Science and Engineering Conference (MSEC 2008), Evanston, Illinois, USA, MSEC_ICMP2008-72242, pp. 505-514, October 7-10, 2008.

22. Lin, Y., Foy, K., Huang, Y., and Chrisey, D.B., “Bubble Formation Modeling In Matrix-Assisted Pulsed-Laser Evaporation Direct Write,” Proc. of the ASME 2008 International Manufacturing Science and Engineering Conference (MSEC 2008), Evanston, Illinois, USA, MSEC_ICMP2008-72241, pp. 497-504, October 7-10, 2008.

21. Wang, K.-C., Jacob, J., Tang, L., and Huang, Y., “Transmission Error Avoidance for IEEE 802.15.4 Wireless Sensors on Rotating Structures,” Proc. of 1st International Workshop on Sensor Networks (SN 2008) at the 17th International Conference on Computer Communications and Networks (ICCCN), St. Thomas, U.S. Virgin Islands, pp. 1-6, August 3-7, 2008.

20. Tang, L., Wang, K-C., Liu, M., Huang, Y., and Gu, F., “Multipath Effect and Design Considerations for Wireless Sensors in Plant Floor Environments,” Proc. of 2008 International Symposium on Flexible Automation, Atlanta, GA, ISFA2008U_134, pp. 1-7, June 23-26, 2008.

19. Wang, K-C., Jacob, J., Tang, L., Huang, Y., and Gu, F., “Error Pattern Analysis for Data Transmission of Wireless Sensors on Rotating Industrial Structures,” Proc. of SPIE Vol. 6932, Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems 2008, San Diego, CA, 693243-1-10, Mar. 9-13, 2008.

18. Wang, W., and Huang, Y., “Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method,” Proceedings of the 2nd International Conference on Micromanufacturing (ICOMM 2007), Greenville, SC, pp. 257-262, September 10-13, 2007.

17. Foy, K., Wei, Z., Matsumura, T., and Huang, Y., “Effect of Tilt Angle on Cutting Regime Transition in Micromilling of Glass,” Proceedings of the 2nd International Conference on Micromanufacturing (ICOMM 2007), Greenville, SC, pp. 213-218, September 10-13, 2007.

16. Wang, K-C., Tang, L., and Huang, Y., “Wireless Sensors on Rotating Structures: Performance Evaluation and Radio Link Characterization,” Proc. of the Second ACM International Workshop on Wireless Network Testbeds, Experimental evaluation and Characterization (ACM WiNTECH 2007), Montreal, Quebec, Canada, pp. 3-10, September 10, 2007.

15. Nguyen, N., Bakhtiari-Nejad, M., and Huang, Y., “Hybrid Adaptive Flight Control with Bounded Linear Stability Analysis,” Proc. of 2007 AIAA Guidance, Navigation and Control Conference and Exhibit, Hilton Head, SC, AIAA 2007-6422, pp. 1-22, August 20-23, 2007.

14. Tang, L., Wang, K.C., Huang, Y., and Gu, F., “Radio Channel Characteristics of Zigbee Wireless Sensors in Machine Shop for Plant Floor Process Monitoring,” Proc. of the ASME 2006  International Conference on Manufacturing Science and Engineering (MSEC 2006), Ypsilanti, MI, MSEC2006-21115, pp. 989-996, October 8-11, 2006.

13. Long, Y., and Huang, Y., “Worn Tool Force Modeling in 3D Oblique Cutting under Hard Turning Conditions,” Proc. of the ASME 2006 International Conference on Manufacturing Science and Engineering (MSEC 2006), Ypsilanti, MI, MSEC2006-21063, pp. 509-518, October 8-11, 2006.

12. Wang, X., Tang, L., Gu, F., and Huang, Y., “System Modeling, Performance Index Formulation and its Optimization in Sensor Placement: a Survey,” Proc. of 2006 International Symposium on Flexible Automation, Osaka, Japan, 0231-a(L), pp. 777-784, July 10-12, 2006.

11. Wang, X., Huang, Y., Nguyen, N., and Krishnakumar, K., “CBN Tool Flank Wear Modeling Using a Hybrid Neural Network,” Proc. of 2006 International Symposium on Flexible Automation, Osaka, Japan, 0231-b(L), pp. 67-74, July 10-12, 2006.

10. Williams, R.E., Huang, Y., Melkote, S., Kinsey, B., Sun, W., and Yao, D., “Recent Advances in Micro/Meso-Scale Manufacturing Processes,” Proc. of the ASME 2005 International Mechanical Engineering Congress and Exposition (IMECE 05), Orlando, FL, IMECE2005-79889, pp. 863-884, Nov. 5-11, 2005.

9. Morehead, M., and Huang, Y., “Machinability Research and Workpiece Microstructure Characterization in Turning of Ultrafine Grained Copper,” Proc. of the ASME 2005 International Mechanical Engineering Congress and Exposition (IMECE 05), Orlando, FL, IMECE2005-82638, pp. 1167-1176, Nov. 5-11, 2005.

8. Long, Y., Zhang, C., Zhang, N., Huang, Y., and Wen, X., “Formation of Highly Aligned Grooves on the Inner Surface of Semi-Permeable Hollow Fiber Membrane for the Directional Axonal Outgrowth,” Proc. of the ASME 2005 International Mechanical Engineering Congress and Exposition (IMECE 05), Orlando, FL, IMECE2005-81235, pp. 151-159, Nov. 5-11, 2005.

7. Tung, S., Huang, Y., and Karczynski, D.C, “Tribological Investigation of the Polymer-Based Lubrication System with Micropores Used in a Manufacturing Transfer Line,” Proceedings of World Tribology Congress III, Washington, D.C., WTC2005-64277, pp. 845-846, September 12-16, 2005.

6. Pehlivan, S., Summers, J.D., and Huang, Y., “Representation Requirements for Supporting Intelligent Fixture Design Retrieval and Reuse,” Proc. of SPIE Vol. 5605, Intelligent Systems in Design and Manufacturing V, SPIE Optics East 2004, Philadelphia, PA, pp. 87-96, Oct. 25-26, 2004.

5. Huang, Y., and KrishnaKumar, K., “Estimating Engine Quality Parameters using a Novel Fully Connected Recurrent Neural Network,” Proceedings of 2004 Japan-USA Symposium on Flexible Automation, Denver, CO,  UL_033, pp. 1-6, July 19-21, 2004.

4. Huang, Y., and Liang, S.Y., “CBN Tool Wear Modeling in Finish Hard Turning,” Proc. of the ASME 2003 International Mechanical Engineering Congress and Exposition (IMECE 03), Washington DC, IMECE2003-42165, pp. 193-200, Nov. 15-21, 2003.

3. Tung, S.C., and Huang, Y., “Modeling of Abrasive Wear in a Piston Ring and Engine Cylinder Bore System,” Proc. of the ASME/STLE 2003 International Tribology Conference, Ponte Vedra Beach, FL, 2003-TRIB-033, pp. 1-6, Oct. 26-29, 2003.

2. KrishnaKumar, K., Yachisako, Y., and Huang, Y., “Jet Engine Performance Estimation using Intelligent System Technologies,” Proc. of 39th Aerospace Sciences Meeting and Exhibit, Reno, NV, AIAA Paper 2001-1122, pp. 1-10, Jan. . 8-11, 2001.

1. Huang, Y., Chen, Z.C., and Cuttino, J., “The Effects of Interstitial Media on Thermal Condition Monitoring,” Proc. of 14th American Society for Precision Engineering Annual Conference, Monterey, CA,  pp. 275-278, October 31-November 5, 1999.